Setup guide

4-Port Broadcom Adapter
Connect the workstation to your facility's network to access background
rendering nodes, other Lustre Stations, and the facility's NAS or SAN centralized
storage (if applicable). You connect the ports on the Broadcom card as follows:
■ Connect Port 0 to the Autodesk control surface hub or the control surface
itself.
■ Connect Port 1 to your house network.
■ Connect Port 2 to a SAN private network (optional).
For more details about configuring the Autodesk control surface, see
Connecting the Autodesk Control Surface on page 32.
Integrated Network Adapter
For Windows-based workstations, connect the integrated network port to the
Slave Renderer. For more details about configuring the Slave Renderer, see
Connecting the Slave Renderer to a Lustre Workstation on page 39.
For Linux-based workstations, connect the integrated network port to the
Incinerator private port. Refer to the Autodesk Incinerator Installation and User
Guide for information on how to connect your workstation to the Incinerator
private network.
4-Port Broadcom Adapter | 29