Setup guide

22 Click Finish.
The driver and interface install.
Repeat step 19 to step 22 for the second Infiniband port adapter.
The Infiniband Host Channel Adapter and the two IP over IB port adapters
should appear in the Device Manager dialog box, without exclamation
marks on their icons.
To optimize the Infiniband driver on Windows:
NOTE The Infiniband driver optimization steps are optional.
1 Go to the Network Connections panel.
2 Right-click on the connected IPoIB port and select Properties.
3 Click the Advanced tab.
4 Click Configure.
5 Configure the card so you have these values:
■ Receive Queue Depth of 256
Infiniband Network Support for Lustre on Windows-based Workstations | 27