Setup guide

To upgrade the NVIDIA graphics driver:
1 Copy the driver upgrade package located in the Lustre 2011 release
package (Drivers\Nvidia\165.46.zip) to a temporary location on your
system.
2 Use a compression utility, like Winzip, to decompress the driver upgrade
package and extract it to a folder on your system.
3 Open the folder that contains the upgrade package you extracted and
double-click setup.exe to start the driver update.
4 Click Next to continue the upgrade procedure.
A Hardware Installation warning message appears.
5 Click Continue Anyway.
6 Select Yes, I want to restart my computer now, and click Finish.
After you reboot, the NVIDIA graphics card driver is installed.
Ensuring Proper Environmental Conditions
You should consider the following environmental guidelines for all hardware
configuration:
■ Make sure the rack in which hardware components are installed is open
or ventilated. Follow the ventilation specifications that apply to your
system.
■ Place all components in an air-conditioned environment. All hardware
components generate heat and must be kept cool. See Power and Air
Conditioning Requirements on page 13.
■ Keep all hardware components in a clean, dust-free location.
■ Minimize vibration and humidity.
■ Do not block the vents on the component housing.
■ Do not drape anything, such as a jacket or a blanket, over hardware
components.
■ Minimize electromagnetic noise by separating digital data and power cables
from analog audio cables and running them in different cable ducts.
12 | Chapter 1 Introduction