Setup guide

ValueItemBIOS Menu
Hard Drive, Integ-
rated IDE
DisabledRuntime Power
Management
Storage, Power, OS Power Management
NormalIdle Power SavingsStorage, Power, OS Power Management
DisabledACPI S3 SupportStorage, Power, OS Power Management
DisabledS5 Wake on LANStorage, Advanced, Device Options
Slot5 speed
100Mhz PCI-x m1
Slot5 - PCI 133Advanced
Restoring BIOS to Default Factory Settings
The following procedure restores the default factory BIOS settings.
To restore default factory BIOS settings:
1 Press F10 while booting the workstation to enter the system BIOS.
2 From the File menu select Default setup | Restore Factory
Settings as Default.
3 Press F10 to accept the changes.
4 Select Apply Defaults and Exit.
This restores the original factory system defaults.
Verifying and Updating the Graphics Card
Driver
A new graphic driver (NVIDIA
®
driver 165.46) is required for Lustre 2011
Windows systems. To upgrade the NVIDIA graphics card driver, complete the
following instructions.
Restoring BIOS to Default Factory Settings | 11