Quick Reference Guide

Figure 2-2 Trigger Single Mode
Trigger Hold Multiple Mode
When the trigger is pulled, scanning starts and the product scans until the trigger is released or a
programmable duration has elapsed. Reading a label does not disable scanning. Double Read
Timeout prevents undesired multiple reads while in this mode.
NOTE: See the Programming Guide (PG) for additional programmable features. In this case:
Scanning Active Time.
Double Read Timeout is also programmed using the PG.
Figure 2-3 Trigger Hold Multiple Mode
Trigger Pulse Multiple Mode
When the trigger is pulled and released, scanning is activated until programmable duration has
elapsed or the trigger has been pulled again to transition to another state. Double Read Timeout
prevents undesired multiple reads while in this mode.
NOTE: See the Programming Guide (PG) for additional programmable features. In this case:
Scanning Active Time.
Double Read Timeout is also programmed using the PG.
Figure 2-4 Trigger Pulse Multiple Mode
Flashing Mode
The reader flashes on and off regardless of the trigger status.
NOTE: This is controlled by Flash On Time and Flash Off Time. Use the PG to program these
options.
4 Chapter 2 Using the Scanner ENWW