Operating instructions

3.3 Starting a Tru64 UNIX Installation
Tru64 UNIX is installed from the CD-ROM drive connected to the sys-
tem. The display that you see after you boot the CD depends on
whether your system console is a VGA monitor or a serial terminal.
Example 3–3 Text-Based Installation Display
P00>>>b dqa0
(boot dqa0.0.0.16.0 -flags 0,0)
block 0 of dqa0.0.0.16.0 is a valid boot block
reading 15 blocks from dqa0.0.0.16.0
bootstrap code read in
base = 310000, image_start = 0, image_bytes = 1e00(7680)
initializing HWRPB at 2000
initializing page table at 5fff0000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
UNIX boot - Tuesday February 26, 2002
Loading vmunix ...
.
.
Initializing system for Tru64 UNIX installation. Please wait...
.
.
*** Performing CDROM Installation
Loading installation process and scanning system hardware.
Welcome to the Tru64 UNIX Installation Procedure
This procedure installs Tru64 UNIX onto your system. You will be asked a
series of system configuration questions. Until you answer all questions,
your system is not changed in any way.
During the question and answer session, you can go back to any
previous question and change your answer by entering: "history"
You can get more information about a question by entering: "help"
Refer to the "Installation Guide" and "Installation Guide – Advanced
Topics" for more detailed information about installing the operating
system.
The following options are available:
<Press RETURN for more>:
o The "U.S. English Installation" installs the base operating system
software.
o The "Installation with Worldwide Language Support" (WLS) lets you
internationalize your system. This option installs the base operating
system software as well as WLS software. The additional software subsets
provide support for various countries and their native languages.
3-18 DS25 Owner’s Guide