Operating instructions

3.2.1 Booting Tru64 UNIX over the Network
To boot your Tru64 UNIX system over the network, make sure the sys-
tem is registered on a Remote Installation Services (RIS) server. See
the Tru64 UNIX document entitled Sharing Software on a Local Area
Network for registration information.
Example 3–2 RIS Boot
P00>>> show device
dqa0.0.0.16.0 DQA0 HL-DT-ST GCE-8302B 2.01
dva0.0.1000.0* DVA0
ega0.0.0.5.2 EGA0 00-00-00-00-00-00
eia0.0.0.8.0 EIA0 40-00-04-A5-F8-00
pka0.7.0.1.2 PKA0 SCSI Bus ID 7
pkb0.7.0.101.2 PKB0 SCSI Bus ID 7
P00>>>
P00>>> set ega0_protocols bootp
P00>>> set ega0_inet_init bootp
P00>>> boot ega0 Da
.
.
.
* The floppy drive is not used on the DS25 system.
3-16 DS25 Owner’s Guide