Operating instructions

2.2 Power-Up Displays
Power-up information is displayed on the operator control panel LEDs
and on the console terminal startup screen. Messages sent from the
SROM (serial read-only memory) program are displayed first, followed
by messages from the SRM console.
NOTE: The power-up text that is displayed on the screen depends on what
kind of terminal is connected as the console terminal: VT or VGA.
If the SRM console environment variable is set to serial, the entire
power-up display, consisting of the SROM and SRM power-up mes-
sages, is displayed on the VT terminal screen. If console is set to
graphics, SROM messages are not displayed, and the SRM messages
are delayed until VGA initialization has completed. If the COM1_mode
is set to through, RMC will also display power-up and fatal messages.
2-4 DS25 Owner’s Guide