Operating instructions

A
Acoustics, 8-7
Antistatic wrist strap, 4-12
APB program, 3-27
auto_action environment variable, 3-3, 5-4
Autoboot, 3-3
Auxiliary power supply, RMC, 6-3
B
Baud rate, setting, 5-50
Beep codes, 7-2
boot command, 5-21
Boot devices, specifying, 3-5
Boot file, specifying, 3-6
Boot flags
OpenVMS, 3-9
UNIX, 3-7
boot options
setting, 3-2
Boot problems, 7-8
boot_file environment variable, 3-6
boot_osflags environment variable, 3-7
Bootable devices
displaying, 2-18
bootdef_dev environment variable, 3-5
Booting
Linux, 3-20
OpenVMS, 3-24
OpenVMS, from InfoServer, 3-26
OpenVMS, from local CD-ROM, 3-24
Tru64 UNIX, from the network, 3-16
UNIX, from SCSI disk, 3-13
bootp protocol, 3-12
Bus node ID, SCSI, 5-60
Bypass modes, 6-6
Bypassing the RMC, 6-6
Index
C
CD-ROM
location, 1-17
Chassis
system building blocks, 1-3
Clear alert command (RMC), 6-29
Clear password command, 5-45
Clear password command (SRM), 2-28
Clear port command (RMC), 6-30
Clearing SRM password, 2-28
COM ports, baud rate, 5-50
com*_baud environment variable, 5-50
COM1 environment variables, 6-10
com1_mode environment variable, 6-4
Command conventions, RMC, 6-13
Command syntax, SRM console, 5-7
Components
customer installable, 4-10
service installable, 4-10
steps before installing, 4-10
system chassis, 1-3
system front, 1-5
Configuration
memory, 4-14
CPU, 4-19
Configuring disk drives, 4-34
Connections
rear panel, 1-7
Connectors, rear, 1-6
Console commands list, 5-5
Console device, activating, 5-63
Console environment variable, 5-51
Console environment variable (SRM), 2-4
Console password, 2-23
clearing, 2-28
Console program, 2-10
Console security
Index-1