Operating instructions

8.5.2 Country-Specific Requirements
Table 8–5 Power Cord Requirements by Country
Country Accredited Agency Applicable Note Numbers
Australia EANSW 1
1
1
2
1
1
1
1
1
3
1
1
1
1
2
Austria OVE
Belgium CEBC
Canada CSA
Denmark DEMKO
Finland SETI
France UTE
Germany VDE
Italy IMQ
Japan JIS
Norway NEMKO
Sweden SEMKO
Switzerland SEV
United Kingdom BSI
United States UL
NOTES:
1. Flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm
2
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. Flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor.
Wall plug must be a two-pole grounding type with a NEMA 5-15P (15A,
125V).
3. Appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law.
Flexible cord must be Type VCT or VCTF, 3-conductor, 1.0 mm
2
conductor
Industrial Standard C8303 (7A, 125V) configuration.
size. Wall plug must be a two-pole grounding type with a Japanese
Specifications 8-9