Operating instructions

6.6.1 Displaying the System Status
The RMC status command displays the system status and the current
RMC settings. Table 6–1 explains the status fields. See Section 6.8 for
information on the commands used to set the status fields.
RMC> status
PLATFORM STATUS
On-Chip Firmware Revision: V1.0
Flash Firmware Revision: V1.1
Server Power: ON
System Halt: Deasserted
RMC Power Control: ON
Escape Sequence: ^[^[RMC
Remote Access: Disabled
RMC Password: set
Alert Enable: Disabled
Alert Pending:
Init String:
Dial String:
Alert String:
Com1_mode: THROUGH
Last Alert: System Unplugged or AC loss
Logout Timer: 20 minutes
User String:
RMC>
6-14 DS25 Owner’s Guide