Operating instructions

5.20.7 os_type
The os_type environment variable specifies the default operating sys-
tem. This variable is set at the factory to the setting for the operating
system you purchased. Use this command to change the factory default
setting.
The value of os_type takes effect only after you reset the system by pressing
the Reset button or by issuing the init command.
The syntax is:
set os_type os_type
The options for os_type are:
unix
Sets the default to Tru64 UNIX. The SRM firmware is started
during power-up or reset.
OpenVMS
Sets the default to OpenVMS. The SRM firmware is started dur-
ing power-up or reset.
OSF
Sets the default to Tru64 UNIX. The SRM firmware is started
during power-up or reset.
Linux
Sets the default to Linux. The SRM firmware is started during
power-up or reset.
Example
In this example, the default operating system is set to Tru64 UNIX. After the
system is initialized, the Tru64 UNIX banner is displayed.
P00>>> set os_type unix
P00>>> init
.
.
.
Using the SRM Console 5-57