Operating instructions

5.19.4 Turning Off Security During a Console Session
The login command turns off the security features, enabling access to
all SRM console commands during the current console session. The sys-
tem automatically returns to secure mode as soon as the boot or con-
tinue command is entered or when the system is reset.
Example 5–21 Login
P00>>> login
Secure not set. Please set the password.
P00>>> set password
Please enter the password:
Please enter the password again:
P00>>> login
Please enter the password.
P00>>> show boot*
The login command is entered, but the system is not in secure mode. A
password must be set.
A password is set.
The login command is entered. After the password is entered, console se-
curity is turned off for the current session and the operator can enter com-
mands.
5-42 DS25 Owner’s Guide