Operating instructions

5.16 Initializing the System
The init command resets the system and executes the power-up tests.
Example 5–15 Init
P00>>> init
Initializing...
OpenVMS PALcode V1.96-40, Tru64 UNIX PALcode V1.90-31
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 20e000
heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 1000 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
1024 MB of System Memory
Testing Memory
...
probe I/O subsystem
Hose 0 - PCI bus running at 33Mhz
entering idle loop
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 8 -- eia -- Intel 82559ER Ethernet
bus 0, slot 9 -- vga -- 3D Labs OXYGEN VX1
Using the SRM Console 5-31