Operating instructions

5.12 Testing the System
Use the test command to run firmware diagnostics for components of
the system. Use Ctrl/C to abort testing.
Example 5–10 Test
P00>>> test
Default zone extended at the expense of memzone.
Use INIT before booting
Testing Ethernet device(s)
Testing Memory
Testing IDE/ATAPI disks (read-only)
Testing SCSI disks (read-only)
dqa0.0.0.105.0 has no media present or is disabled via the RUN/STOP
switch
file open failed for dqa0.0.0.105.0
Testing drive
^C
P00>>>
Using the SRM Console 5-23