Operating instructions

5.5 Displaying the Bootable Devices
The show device command displays the devices and controllers in the
system, including the bootable devices.
Example 5–3 Show Dev
P00>>> show device
dqa0.0.0.16.0
dva0.0.1000.0*
ega0.0.0.5.2
eia0.0.0.8.0
pka0.7.0.1.2
pkb0.7.0.101.2
P00>>>
ice
DQA0
DVA0
EGA0
EIA0
PKA0
PKB0
* DS25 systems have no floppy drives.
Table 5–5 Device Naming Convent
Category Description
dk
Driver ID Two-letter designator of port or class driver
dk SCSI drive or CD ew Ethernet port
dq IDE CD-ROM fw FDDI device
dr RAID set device mk SCSI tape
du DSSI disk mu DSSI tape
eg Ethernet port pu DSSI port
ei Ethernet port
a
Storage adapter One-letter designator of storage adapter
ID (a, b, c…).
0
Device unit num- Unique number (MSCP unit number). SCSI unit
ber numbers are forced to 100 X node ID.
0
Bus node number Bus node ID.
0
Channel number Used for multi-channel devices.
16
Logical slot num. Corresponds to logical slot number (see example
above)
0
Hose number Hose 0, 1, 2, 3
HL-DT-ST GCE-8302B 2.01
00-00-00-00-00-00
40-00-04-A5-F8-00
SCSI Bus ID 7
SCSI Bus ID 7
ions
Using the SRM Console 5-15