Operating instructions

4.5.1 Installing and Removing DIMMs
Before installing DIMMs, shut down the operating system, turn off
power to the system, and unplug the power cord. Remove the side
cover (pedestal) or top cover (rackmount) and attach an antistatic
wrist strap.
Figure 4–12 Removing DIMMs
CAT0125A
2
1
1. Shut down the operating system and turn off power to the system. Unplug
the power cord from each power supply.
2. Use Table 4–2 and the memory configuration rules for determining where
sets of memory DIMMs should be installed.
3. Release the clips
securing the appropriate DIMM and slide out the
DIMM. See Figure 4–12.
Configuring and Installing Components 4-17