Technical data

2. If you are connecting a peripheral using DEC423 cables, follow these
steps:
a. Set the on/off switch on the peripheral to the off (O) position.
b. Connect the EIA-232 to DEC423 adapter to the asynchronous modem
control port (see Figure 4–5).
c. Tighten the screws on each side of the adapter using a small
screwdriver.
d. Connect the DEC423 cable to the MMJ port on the adapter.
e. Connect the other end of the DEC423 cable to the correct port on the
peripheral.
f. Set the on/off switch on the peripheral to the on (|) position.
4–16 Hardware Options