Technical data

3.6 Completing the Ethernet Installation
The network coordinator must complete the installation. You must give the
following information to the network coordinator:
• A unique node name comprised of a maximum of six alphanumeric
characters
Choose any node name and ask the network coordinator to make sure that
the node name is unique on the network.
• The system’s Ethernet address
To determine the system’s Ethernet address, follow these steps:
1. Enter the following command at the console prompt:
>>> SHOW ETHERNET
The system displays a response similar to the following:
ETHERNET = 08-00-2B-1A-0B-BB
The alphanumeric string, shown in the form nn-nn-nn-nn-nn-nn, is the
Ethernet address.
2. Write down the Ethernet address and give it to the network
coordinator.
3.6.1 If the Network Installation Fails
If the network installation fails, contact your Digital Services representative.
Network Information 3–11