Technical data

Removing a Caddy Manually
To remove a caddy manually from the RRD42, see Figure 2–17 and follow these
steps:
1. Set the on/off switch on the system unit to the off (O) position.
2. Insert a straightened large paper clip or metal rod, 1.2 millimeters (mm)
(0.047 inches) in diameter and not less than 35 mm (1.38 in.) long, into the
emergency eject hole and push the clip or rod in until the caddy rises.
3. Push the clip or rod hard until the caddy emerges from the slot.
Figure 2–17 Removing Caddy Manually
1
2
MLO-010775
Paper Clip—Insert the clip 35 mm into the emergency eject hole.
Disc and Disc Caddy.
Internal System Devices 2–31