Technical data

Inserting the Caddy into the RRD42
Insert the caddy into the slot on the front of the RRD42 with the disc label
facing upwards, as shown in Figure 2–15. Push the caddy until it is completely
inserted.
Figure 2–15 Inserting Caddy with Disc into RRD42
1
2
MLO-010773
Disc and Disc Caddy
Busy LED
The busy LED then stays on for a few seconds. When the busy LED goes off,
the RRD42 can receive commands and you can read data from the compact
disc.
The RRD42 ejects the compact disc if the disc is upside-down, not properly
inserted in the caddy, or if other conditions prevent it from reading the disc.
Internal System Devices 2–29