Technical data

2.5.2 Inserting a Compact Disc into the RRD42 Compact Disc Drive
Inserting a compact disc involves two stages:
• Loading the compact disc into the caddy
• Inserting the caddy into the RRD42
These stages are described in the following subsections.
Loading the Compact Disc into the Caddy
To load the compact disc into the caddy, follow these steps:
1. If there is a protective film on the center of the caddy lid, as shown in
Figure 2–12, remove it before using the caddy.
Figure 2–12 Compact Disc Caddy Protective Film
1
2
MLO-010770
Disc Caddy
Protective Film
2–26 Internal System Devices