Technical data

2.2.3 Removing a Tape Cartridge from the Drive
To remove a tape cartridge, follow these steps:
Caution
• The tape must fully rewind before you can remove the tape
cartridge from the tape drive.
• Remove the tape cartridge from the drive before setting the on/off
switch on the system unit to the off (O) position.
1. Press the unload button (see Figure 2–4) or enter the appropriate system
software command.
The yellow LED flashes as the tape rewinds. Once the tape rewinds
completely, the beeper sounds twice and the green LED turns on.
2. Move the operate lever to the unlock position.
3. Remove the tape cartridge from the tape drive after it ejects.
2–10 Internal System Devices