Technical data

2.2.2 Inserting and Using a Tape Cartridge
To insert a tape cartridge, see Figure 2–3 and follow these steps:
1. Slide the operate lever to the unlock position.
2. Insert the tape cartridge following these rules:
• If you insert the tape cartridge more than half-way into the drive, you
must insert the tape cartridge fully.
• If you want to use another tape cartridge, insert the tape cartridge
fully, unload the tape cartridge, and then remove it.
• If you cannot insert the tape cartridge into the TZ30, move the operate
lever to the lock position. Then move the operate lever to the unlock
position and reinsert the tape cartridge.
• Do not push the tape cartridge into the TZ30 while moving the operate
lever between the lock and unlock positions. If you do so, the TZ30
interprets this action as an insertion of the tape cartridge.
The green LED turns on.
Internal System Devices 2–7