Technical data

Table 2–1 TZ30 Controls

Control Function

Unload button The unload button rewinds and disengages the tape from the take-

up reel inside the TZ30. The tape must be completely rewound and

unloaded into the tape cartridge before you can remove the tape

cartridge from the drive. The tape is fully unloaded when the operate

lever LED is on.

Operate lever

Use the operate lever to lock or unlock a tape cartridge. To insert a

tape cartridge, the operate lever must be in the unlock position. Once

you insert a tape cartridge and the green LED is on, move the operate

lever to the lock position. To eject the tape cartridge from the drive,

(only when the green LED is on or ﬂashing, and after the beeper

sounds momentarily), move the operate lever to the unlock position.

When using the operate lever, slide it completely to the lock or unlock position before beginning the next

operation.

Internal System Devices 2–5