Technical data

SCSI terminator, 1–4, 4–5
connecting, 4–8
removal, 4–6
SHOW commands, C–6
SHOW CONFIG command, 4–6
SHOW DSSI command, 4–11
SHOW ETHERNET command, 3–11
SHOW Q-BUS command, 4–11
SHOW SCSI command, 4–11
Software
installing with tape cartridges, B–4
Standard Ethernet
connecting to, 3–8 to 3–9
disconnecting transceiver cable, 3–14
removing system from, 3–14
setting network select switch for, 3–2
transceiver cable, 3–8
Standard Ethernet port
icon, 1–6
location, 1–3
use, 1–3
Status LED display
icon, 1–6
location, 1–3
use, 1–3
Switches
network select, 3–2
Synchronous communications options
connecting to, 4–22
DSW42-AA, 4–1, 4–22
Synchronous communications port 0
optional port location, 1–2
optional port use, 1–2
Synchronous communications port 1
optional port location, 1–2
optional port use, 1–2
Synchronous communications ports, 4–1,
4–22
Synchronous interface standards, 4–1
System ac power
location, 1–2
use, 1–2
System board
memory, 4–1
System disk, 2–33
System manager, 3–1
System unit
configuration display, 4–6
connecting Thinwire Ethernet, 3–4
connecting to DECconnect faceplate, 3–6
connecting transceiver cable to, 3–8
controls, 1–2
cover, 2–2
icons, 1–6
LEDs, 1–2
memory, 4–1
ports, 1–2
preparing for expansion box, 4–6
setting network select switch, 3–2
system board memory, 4–1
testing Ethernet installation, 3–10
SYSTEMID, C–3
setting, C–9
T
T-connector
connecting ThinWire Ethernet cable to,
3–4
disconnecting, 3–12
Tape cartridges
caring for, B–4
CompacTape, 2–3
CompacTape II, 2–3
inserting into TZ30, 2–7
installing software with, B–4
labeling, B–3
making backups with, B–4
removing from TZ30, 2–10
use and storage of, B–1
write-protect switch, B–4
write-protecting, B–4
writing to, B–4
Tape drives
TLZ06 cassette tape drive, 2–18
TZ30 tape drive, 2–3
TZK10 QIC tape drive, 2–12
Index–7