Service manual

vii
Appendix C Operating the System Remotely
C.1 RCM Console Overview.......................................................................... C-1
C.1.1 Modem Usage .................................................................................. C-2
C.1.2 Entering and Leaving Command Mode ............................................ C-5
C.1.3 RCM Commands.............................................................................. C-6
C.1.4 Dial-Out Alerts............................................................................... C-15
C.1.5 Resetting the RCM to Factory Defaults........................................... C-18
C.1.6 Troubleshooting Guide................................................................... C-19
C.1.7 Modem Dialog Details.................................................................... C-22
Index
Examples
2-1 SROM Errors Reported at Power-Up......................................................2-11
2-2 XSROM Errors Reported at Power-Up...................................................2-15
2-3 Power-Up Display..................................................................................2-20
3-1 Test Command Syntax ...........................................................................3-12
3-2 Sample Test Command ..........................................................................3-13
3-3 Sample Test Memory Command ............................................................3-15
3-4 Sample Test Command for PCI ..............................................................3-17
5-1 MCHK 670 ............................................................................................5-12
5-2 MCHK 670 CPU and IOD-Detected Failure...........................................5-17
5-3 MCHK 670 Read Dirty Failure...............................................................5-23
5-4 MCHK 660 IOD Detected Failure ..........................................................5-29
5-5 MCHK 630 Correctable CPU Error........................................................5-34
5-6 MCHK 620 Correctable Error ................................................................5-36
5-7 INFO 3 Command..................................................................................5-50
5-8 INFO 5 Command..................................................................................5-52
5-9 INFO 8 Command..................................................................................5-54
A-1 Starting LFU from the SRM Console.......................................................A-6
A-2 Updating Firmware from the Internal CD-ROM ......................................A-8
A-3 Creating Update Diskettes on an OpenVMS System.............................. A-13
A-4 Updating Firmware from the Internal Floppy Disk ................................ A-14
A-5 Selecting AS4X00FW to Update Firmware from the Internal
Floppy Disk...........................................................................................A-17
A-6 Updating Firmware from a Network Device ..........................................A-18
C-1 Sample Remote Dial-In Dialog................................................................ C-4
C-2 Entering and Leaving RCM Command Mode.......................................... C-5
C-3 Configuring the Modem for Dial-Out Alerts.......................................... C-15
C-4 Typical RCM Dial-Out Command......................................................... C-15