Service manual

Index-5
voltages, 4-3
Power system components, 7-4
poweroff command, RCM, C-10
poweron command, RCM, C-11
Power-up
SROM and XSROM messages
during, 2-19
Power-up display, 2-20
Power-up sequence, 2-4
Power-up/down sequence, 4-8
Processor
determining primary, 2-21
Processor correctable error, 5-5
Processor machine checks, 5-5
Q
quit command, RCM, C-11
R
RAID Standalone Configuration
Utility, running, A-5
RCM, C-1
command summary, C-6
dial-out alerts, C-15
entering and leaving command
mode, C-5
modem usage, C-2
resetting to factory defaults, C-18
troubleshooting, C-19
typical dialout command, C-15
RCM commands
?, C-10
alert_clr, C-8
alert_dis, C-8
alert_ena, C-8
disable, C-9
enable, C-9
halt, C-10
hangup, C-9
help, C-10
poweroff, C-10
poweron, C-11
quit, C-11
reset, C-12
setesc, C-12
setpass, C-13
status, C-14
rcm_dialout command, C-15
readme command (LFU), A-24, A-26
Redundant power, 1-37
Registers, 6-1
Remote console monitor. See RCM
Remote console monitor module, 1-32
reset command, RCM, C-12
S
Safety guidelines, 7-1
Serial number, system, 7-30, 7-32
restoring with set
sys_serial_num, 7-31, 7-
33
Serial ports, 1-31
Serial terminal, 2-19
Server control module, 1-32
removal and replacment, 7-38
Server control module power, 7-5
set sys_serial_num command, 7-31,
7-33
setesc command, RCM, C-12
setpass command, RCM, C-13
show power command (SRM), 1-37
Soft errors, categories of, 5-4
SRM commands
show power, 1-37
SRM console, 1-15, 2-23
SROM, 2-21
defined, 2-4
errors, 2-11
power-up test flow, 2-8
tests, 2-10
Standard I/O, 1-32
status command, RCM, C-14
StorageWorks shelf removal and
replacement, 7-70
sys_model_number environment
variable, 7-34
sys_type environment variable, 7-34
System bus, 1-17, 1-26
System bus address parity error, 5-49