Service manual

C-16 AlphaServer 4000/4100 Service Manual
Enabling the Dial-Out Alert Function:
1. Enter the set rcm_dialout command, followed by a dial-out alert string, from
the SRM console (see
➊ in Example C-3).
The string is a modem dial-out character string, not to exceed 47 characters, that
is used by the RCM when dialing out through the modem. See the next topic for
details on composing the modem dial-out string.
2. Enter the RCM firmware console and enter the enable command to enable
remote access dial-in. The RCM firmware status command should display
“Remote Access: ENABLE.” (See
➋.)
3. Enter the RCM firmware alert_ena command to enable outgoing alerts. (See
➌.)