Service manual

C-6 AlphaServer 4000/4100 Service Manual
C.1.3 RCM Commands
The RCM commands summarized below are used to control and monitor a
system remotely.
Table C-1 RCM Command Summary
Command Function
alert_clr Clears alert flag, stopping dial-out alert cycle
alert_dis Disables the dial-out alert function
alert_ena Enables the dial-out alert function
disable Disables remote access to the modem port
enable Enables remote access to the modem port
hangup Terminates the modem connection
halt Halts server
help or ? Displays the list of commands
poweroff Turns off power to server
poweron Turns on power to server
quit Exits console mode and returns to system console port
reset Resets the server
setesc Changes the escape sequence for entering command mode
setpass Changes the modem access password
status Displays server’s status and sensors