Manualshelf

Service manual

ManualsBrandsHP ManualsComputer equipmentAlphaServer 4000
251252253254255256257258259260
Removal and Replacement 7-67
Removal
1. Remove the cabinet fan tray.
2. Disconnect the power harness from the fan you wish to replace.
3. Remove the fan finger guard.
4. Remove the two remaining screws holding the fan to the tray and remove the
fan.
5. If the new fan does not have clip nuts, remove them from the fan.
Replacement
1. Reverse the Removal procedure, taking care to orient the fan so that the
connection to the power harness is dressed nicely.
2. Place the fan tray back in the cabinet.
Verification
Power up the system. If the green power LED comes on, and the fan LED is off, the
cabinet fan tray fan is verified.