Service manual

Removal and Replacement 7-11

Part Number Description

2a 17-04285-01 Power cord from AC input box to power strip. .5 meter, IEC320 to

IEC320 connector used in cabinet systems only. In pedestal

systems, cords match country-specific wall outlets.

1, 2,

H7600-AA Power controller used in place of 30-45353-01, 12-45334-02, and

17-04285-02 in the H9A10-EL cabinet in N. America/Japan

1, 2,

H7600-DB Power controller used in place of 30-45353-02, 12-45334-02, and

17-04285-02 in the H9A10-EM cabinet in Europe/AP

3 17-00606-02

17-04285-02

Power cord from power strip to power supply: The 17-00606-02 is a

2 m NEMA to IEC320 AC jumper used with the 12-23501-01 power

strip in N. Amer./Japan pedestals. The 17-04285-02 is a 2 m IEC320

to IEC320 AC jumper used with the 12-45334-02 power strip used

on pedestals in Eur./APA and on cabinet systems worldwide and has

six IEC320 outlets. In pedestal systems, cords match country-

specific wall outlets.

4 30-44712-01 Power supply; 92 to 264 VAC input; one to three in a system drawer.

5 17-04199-01 Cable connecting power supplies

6 17-04385-01 Power distribution harness (later 4000 only)

7 17-04201-01 Cable from OCP to PCI motherboard (cabinet system)

8 70-33002-01 Interlock switches and cable to OCP (later 4000 only)

10 17-04293-01 Cable from power harness to interconnect cable and pedestal tray

connector (pedestal system)

11 17-04302-01 Cable from pedestal tray connector to PCI motherboard (pedestal

system)

12 17-04201-01 Cable from pedestal tray connector to OCP (pedestal system)

13 17-04305-01 Cable from pedestal tray connector to OCP and SCSI devices

(pedestal system)

14 17-04339-01 Power cord from power strip to cabinet fan tray (cabinet only)