Service manual

Error Logs 5-37
Fast Back-to-Back to Different Targets,
Is Not Supported in Target Device.
Device Select Timing: Medium.
Revision ID x02
Device Class Code x010000 Mass Storage: SCSI Bus Controller
Cache Line S x00
Latency T. xFF
Header Type x00 Single Function Device
Bist x00
Base Address Register 1 x00101100
Base Address Register 2 x01119100
Base Address Register 3 x00000000
Base Address Register 4 x00000000
Base Address Register 5 x00000000
Base Address Register 6 x00000000
Expansion Rom Base Addres x00000000
Interrupt P1 x0C
Interrupt P2 x01
Min Gnt x00
Max Lat x00
CONFIG Address x000000FBC0002000
Device and Vendor ID x00091011 DECchip 21140 10/100Mhz TULIP
Ethernet
Vendor ID: x1011 (Digital Equip Corp)
Device ID: x00000009
Command Register x0147 I/O Space Accesses Response: Enabled
Memory Space Accesses Response: Enabled
PCI Bus Master Capability: Enabled
Monitor for Special Cycle Ops: DISABLED
Generate Mem Wrt/Invalidate Cmds: DISABLED
Parity Error Detection Response: Normal
Wait Cycle Address/Data Stepping: DISABLED
SERR# Sys Err Driver Capability: Enabled
Fast Back-to-Back to Many Target: DISABLED
Status Register x0280 Device is 33 Mhz Capable.
No Support for User Defineable Features.
Fast Back-to-Back to Different Targets,
Is Supported in Target Device.
Device Select Timing: Medium.
Revision ID x12
Device Class Code x020000 Network Controller: Ethernet Controller
Cache Line S x00
Latency T. xFF
Header Type x00 Single Function Device
Bist x00
Base Address Register 1 x00101000
Base Address Register 2 x01119000
Base Address Register 3 x00000000
Base Address Register 4 x00000000
Base Address Register 5 x00000000
Base Address Register 6 x00000000
Expansion Rom Base Addres x00000000
Interrupt P1 x10
Interrupt P2 x01
Min Gnt x00
Max Lat x00
CONFIG Address x000000FBC0002800
Device and Vendor ID x00081011 DEC_KZPSA Fast-Wide-Differential SCSI
Vendor ID: x1011 (Digital Equip Corp)
Device ID: x00000008