Service manual

ManualsBrandsHP ManualsComputer equipmentAlphaServer 4000

141

142

143

144

145

146

147

148

149

150

5-36 AlphaServer 4000/4100 Service Manual

Base Address Register 6 x00000000

Expansion Rom Base Addres x00000000

Interrupt P1 x04

Interrupt P2 x01

Min Gnt x00

Max Lat x00

CONFIG Address x000000FBC0001000

Device and Vendor ID x00011069 Mylex DAC960 KZPSC RAID Controller

Vendor ID: x1069 (Mylex)

Device ID: x00000001

Command Register x0147 I/O Space Accesses Response: Enabled

Memory Space Accesses Response: Enabled

PCI Bus Master Capability: Enabled

Monitor for Special Cycle Ops: DISABLED

Generate Mem Wrt/Invalidate Cmds: DISABLED

Parity Error Detection Response: Normal

Wait Cycle Address/Data Stepping: DISABLED

SERR# Sys Err Driver Capability: Enabled

Fast Back-to-Back to Many Target: DISABLED

Status Register xC200 Device is 33 Mhz Capable.

No Support for User Defineable Features.

Fast Back-to-Back to Different Targets,

Is Not Supported in Target Device.

Device Select Timing: Medium.

SIGNALED SYSTEM ERROR: This Device has Set

A System Error on SERR# Line.

DETECTED PARITY ERROR:This Device Detected

Revision ID x02

Device Class Code x010400

Cache Line S x10

Latency T. xFF

Header Type x00 Single Function Device

Bist x00

Base Address Register 1 x00101200

Base Address Register 2 x01119200

Base Address Register 3 x00000000

Base Address Register 4 x00000000

Base Address Register 5 x00000000

Base Address Register 6 x00000000

Expansion Rom Base Addres x01110000

Interrupt P1 x08

Interrupt P2 x01

Min Gnt x04