User's Manual

Supported media types
Table 1-3 Tray 1 media types
Type Dimensions Weight or thickness Capacity
1
Plain Minimum: 76 x 127 mm (3 x 5 in)
Maximum: 216 x 356 mm
(8.5 x 14 in)
60 to 199 g/m
2
(16 to 53 lb)
100 sheets
Preprinted
60 to 120 g/m
2
(16 to 32 lb)
100 sheets
Letterhead
60 to 120 g/m
2
(16 to 32 lb)
100 sheets
Prepunched
60 to 120 g/m
2
(16 to 32 lb)
100 sheets
Bond
60 to 120 g/m
2
(16 to 32 lb bond)
100 sheets
Recycled
60 to 120 g/m
2
(16 to 32 lb)
100 sheets
Colored paper
60 to 120 g/m
2
(16 to 32 lb)
100 sheets
Rough
60 to 199 g/m
2
(16 to 53 lb)
Up to 100 sheets
Light
60 to 75 g/m
2
(16 to 20 lb)
100 sheets
Custom
60 to 199 g/m
2
(16 to 53 lb)
Up to 100 sheets
Transparencies
2
0.10 to 0.14 mm thick (4.7 to 5 mils thick) Up to 60 sheets
Envelopes
75 to 90 g/m
2
(20 to 24 lb)
10 envelopes
Labels 0.10 to 0.14 mm thick (4.7 to 5 mils thick) Up to 60 sheets
Cardstock
Greater than 163 g/m
2
(greater than 43 lb)
Up to 100 sheets
1
Capacity can vary depending on media weight and thickness and environmental conditions.
Smoothness should be 100 to 250 (Sheffield). For ordering information, see
Order parts, accessories,
and supplies on page 200.
2
Use only transparencies that are designed for use with HP LaserJet printers. This device can detect
transparencies that were not designed for use with HP LaserJet printers.
Table 1-4 Tray 2 and tray 3 media types
Type Dimensions Weight or thickness Capacity
1
Plain Minimum: 140 x 216 mm (5.5 x 8.5 in)
Maximum: 216 x 356 mm (8.5 x 14 in)
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
Preprinted
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
Letterhead
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
Prepunched
60 to 120 g/m
2
(16 to 32 lb bond)
Up to 500 sheets
Bond
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
Recycled
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
Colored paper
60 to 120 g/m
2
(16 to 32 lb)
Up to 500 sheets
1
The printer supports a wide range of standard and custom sizes of print media. Capacity can vary
depending on media weight and thickness and environmental conditions. Smoothness should be 100
to 250 (Sheffield). For ordering information, see
Order parts, accessories, and supplies
on page 200.
ENWW Media specifications 15