User's Manual

Electrical specifications
WARNING! Power requirements are based on the country/region where the device is sold. Do
not convert operating voltages. This can damage the device and void the product warranty.
Table A-3 Power requirements
Specification 110-volt models 220-volt models
Power requirements 110 to 127 volts (± 10%)
50/60 Hz (± 2 Hz)
220 to 240 volts (± 10%)
50/60 Hz (± 2 Hz)
Rated current 7.0 Amps 4.0 Amps
Table A-4 Power consumption (average, in watts)
Device model Printing Ready Sleep Off
HP LaserJet P3005 610 W 28.5 W 24 W 0.1 W
HP LaserJet P3005d 610 W 28.5 W 24 W 0.1 W
HP LaserJet P3005n 610 W 28.5 W 24 W 0.1 W
HP LaserJet P3005dn 610 W 28.5 W 24 W 0.1 W
HP LaserJet P3005x 610 W 28.5 W 24 W 0.1 W
1
Values subject to change. See www.hp.com/support/LJP3005 for current information.
2
Power numbers are the highest values measured using all standard voltages.
3
Default time from Ready mode to Sleep = 30 minutes.
4
Heat dissipation in Ready mode = 35 BTU/hour.
5
Recovery time from Sleep to start of printing = less than 8.5 seconds.
6
Print speed is 35 ppm.
ENWW Electrical specifications 245