User's Manual

Item Values Explanation
PAPER PATH TEST
●
PRINT TEST PAGE
●
SOURCE
●
DUPLEX
●
COPIES
No values available
Generate a test page, which is useful for testing the paper-
handling features of the device.
●
PRINT TEST PAGE
Press the to start the paper-path test using the source
(tray), destination (output bin), duplex, and number of copies
settings that you set in the other items on the PAPER PATH
TEST menu. Set the other items before selecting PRINT TEST
PAGE.
●
SOURCE
●
ALL TRAYS
●
TRAY 1
●
* TRAY 2
●
TRAY N
Select the tray for the paper path that you want to test. You can
select any tray that is installed. Select ALL TRAYS to test the
paper path for every tray. Paper must be loaded in the selected
trays.
●
DUPLEX
●
*OFF
●
ON
Determine whether or not the paper goes through the duplexer
during the paper path test. This item is available only if the
duplexer is installed.
●
COPIES
●
*1
●
10
●
50
●
100
●
500
Set how many sheets of media are used from each tray during
the paper-path test.
Test pages
Printing test pages helps you determine whether or not the device engine and the formatter are
functioning.
NOTE Information pages also can be used to solve device issues. See Use information
pages on page 38.
Engine-test page
To verify that the device engine is functioning, print an engine-test page.
1. Remove the right-side cover (see
Right-side cover on page 69).
2. Press the engine-test-page button (callout 1) near the formatter.
Table 6-2 Diagnostics menu (continued)
ENWW Troubleshooting tools 165