User's Manual

Control panel message Description Recommended action
To clear press
If the message reappears, a problem might
exist in the software program.
USB STORAGE FILE SYSTEM IS FULL
alternates with
Ready
To clear press
The device received a PJL file system
command that attempted to store something
on the file system but was unsuccessful
because the file system is full.
1. Use HP Web Jetadmin software to
delete files from the storage device, and
then try again.
2. To remove this message from the
display, press
.
USB STORAGE IS WRITE PROTECTED
alternates with
Ready
To clear press
The file system is protected and no new files
can be written to it.
1. To enable writing to the storage device,
use HP Web Jetadmin to turn off write
protection.
2. To remove this message from the
display, turn the device off and then on.
USB STORAGE X REMOVED The USB storage accessory was removed
while the device was turned on.
1. Turn the device off.
2. To continue using the USB storage
accessory, reinstall it.
3. Turn the device on.
USE TRAY X <TYPE> <SIZE> The device is offering a selection of alternate
media to use for the print job.
1.
Use
and to highlight a different
size or type, and then press
to select
the size or type.
2.
Press
to return to the previous size
or type.
See
Load input trays on page 19 for more
information.
ENWW Control-panel messages 147