User's Manual

Control panel message Description Recommended action
mechanism swings outward, away from
the chassis. When the cartridge is
inserted into the device, the mechanism
closes toward the chassis.
Install supply
alternates with
For status press
The print cartridge is missing. Install the missing cartridge. For more
information, see
Change the print cartridge
on page 23.
INSUFFICIENT MEMORY TO LOAD
FONTS/DATA
This message alternates with the name of the
storage device. The storage device does not
have enough memory to load the fonts or
other data.
Press to continue printing without using
the data.
To solve the problem, increase the amount of
memory for the device. Press
for more
information.
LOAD TRAY X <TYPE> <SIZE>
alternates with
For help press
Tray X is either empty or configured for a type
and size other than that specified in the job.
No other tray is available.
Press for help.
or
See
Load input trays on page 19 for more
information.
LOAD TRAY X <TYPE> <SIZE>
alternates with
To use another tray press
Tray X is either empty or configured for a type
and size other than that specified in the job.
Press for help.
or
Press
to print from another tray. See Load
input trays on page 19 for more information.
LOAD TRAY 1 PLAIN PAPER Sensor PS902 in tray 1 cannot detect paper
in the tray.
1. Verify that paper is loaded in tray 1.
2. Verify that the sensor flag in tray 1 is fully
functional. It should be unhindered and
move freely when paper is loaded.
3. Verify that the sensor connector is firmly
seated in connector J503 on the ECU.
MANUALLY FEED <TYPE> <SIZE>
alternates with
For help press
Tray 1 is empty and no other tray is available.
Load media into tray 1, and press to
continue.
or
Press
for help.
or
See
Load input trays on page 19 for more
information.
MANUALLY FEED <TYPE> <SIZE>
alternates with
To continue press
Media is in tray 1, but the print job requires a
specific type and size that is not currently
available.
Press
to print from the tray.
or
Press
for help.
or
See
Load input trays on page 19 for more
information.
ENWW Control-panel messages 143