Manualshelf

User's Manual

ManualsBrandsHP ManualsAll in One PrinterHP All in One Printer P3005
111112113114115116117118119120
3. At the left side of the device, disconnect one grounding clip (callout 2), thread the clip through the
hole in the device chassis, and then remove two screws (callout 3).
3
2
Figure 5-32 Removing the power supply (2 of 5)
Reinstallation tip Remember how the cable is threaded and connected to the device.
4. Carefully tip the device so that it rests on its top, with the front of the device facing you.
98 Chapter 5 Removal and replacement ENWW