User's Manual

Control Panel Display
The control panel presents messages about the mopier in one or two
lines of the character display.
Control Panel Character Display
The control panel displays the following types of messages:
• Ready status messages mean the mopier is ready to accept data.
• Mopier status messages tell you what the mopier is doing at a given
time. For example:
PROCESSING JOB
FROM TRAY 2
• Mopier attendance messages tell you to perform some action, such as
adding paper or clearing a paper jam.
• Error messages communicate data and print errors. The mopier stops
printing for ten seconds, displays a message, and then automatically
attempts to return to the online state.
• Service messages communicate a mopier failure. Some errors can be
cleared by pressing the [Select[*] key or by cycling power to the
mopier (turn power off and then back on). Others stop all operations
and require service.
Figure 4-3
4-4 Mopier Control Panel EN