User's Manual

load envelopes

Use the print feature of your software to print to envelopes with your

HP Officejet. Your HP Officejet provides two methods for working with

envelopes. Do not use shiny or embossed envelopes, or envelopes that have

clasps or windows.

• If you are printing one envelope,

slide the envelope into the

envelope slot, which is located on

the right side toward the back of

the output tray. Insert the envelope

with the flap up and on the left, as

shown in the illustration. Slide the

envelope on the top until it stops.

• If you are printing multiple

envelopes, remove all paper from

the paper tray. Slide a stack of

envelopes into the tray, with the

envelope flaps up and to the left

(print-side down), until they stop.

Adjust the paper-width guide

against the envelopes (be careful

not to bend the envelopes). Make

sure the envelopes fit within the tray

(do not overload it).

Consult the help files in your word-processing software for details on how

to format text for printing on envelopes.

tips for loading other types of paper in the paper tray

This section provides guidelines for loading special types of paper and

transparency film. For best results, adjust the paper settings each time you

change paper types and paper sizes. For more information, see set the paper

type on page 10.

HP Inkjet T-Shirt Transfer Iron-On

Flatten the transfer sheet completely before using it; do not load curled sheets.

To prevent curling, keep transfer sheets sealed in the original package until you

are ready to use them. Manually feed one sheet at a time, with the unprinted

side facing down and the blue stripe facing up.

HP Premium or Premium Plus Inkjet Transparency Film

Insert the film so that the white transparency strip with arrows and the HP logo

is on top and goes into the tray first.