User's Manual

MenuandToolbarOptions

3Com®AirProtectPlannerUserGuide

Figure 65. Changing Location Properties – Local Material Repository Tab

5.5.10 RenumberDevices

Plannercreatesadefaultnumberinglabel,namely01,02…forthedevices.Forexample,APsasAP01,AP02…,whileSensors

asSensor01,Sensor02….IfyoudeleteaparticularAPorSensor,itcancreateadiscontinuity.Youcanrestoresequential

numberingusingtheRenumberDevicesoption.

SelectRenumberDevices

fromtheToolsmenu.

Figure 66. Tools Menu – Renumber Devices

Youcandothefollowing:

• SelectPrefixtorenameobjectswithaprefixasdefinedintheSettingsÆAPDefaults

section.

• SelectLayoutName,orselectUserDefinedtoenterauser‐definednameintheUserDefinedfieldtorename

devicesaccordingly.

• Click<Renumber>torenumberthedevices.

Forexample,ifyouchoosetheoptionBuildingName,andthebuildingnameis‘MyBuilding’,thenPlannerwillnumberthe

APsasMyBuildingA01,MyBuildingA02,andSensorswillbenumberedasMyBuildingS01,MyBuildingS02,andsoon.

ThesystemwillbehavesimilarlywithLayoutNameandUserdefinednames.