User's Manual

Note The examples of default circuit names in figure 4-5, above, appear in HP
Series 200 and 400 routers. Default circuit names in HP Series 600 rout-
ers include the slot number in which the port is installed. For example, if
a four-port Ethernet interface module is installed in slot 2 of the HP
Router 650, the circuit name of the first port on that module would be
ETHER21. Similarly, if a WAN module was installed in slot 3, then the
circuit name of the first port on that module would be WAN31. To help
simplify circuit configurations on an HP Router 650, it is recommended
that you use this method for identifying the slot and port locations for all
circuits.
List of configured circuits
Prompt for your next action
Figure 4-5. Example of Access to Previously Configured Elements
How To Use the Configuration Editor
How To Operate the Configuration Editor
4-12