User's Manual

Press [Return] to select the Yes option. The parameters you want to
add will then appear. Follow the prompts to enter the values for the
desired parameters.
For example, with the configuration menu displayed, if the DoD
Internet Router (IP) Service was not configured and you wanted to
access it, you would type 7 and press [Return] to display the following:
Continuing from page 4-10, if the item you select contains one or
more entries (indicated by a ‘‘(1)’’, ‘‘(2)’’, or other number at the
end of the item) such as:
Circuits (2)
the entries will appear as a numbered list and you will be prompted
with
Action (->> for selections) : Previous Display
For example, with the configuration menu displayed, if one Ethernet
port and one WAN port were configured and you wanted to add
another port configuration, you would type 4 and press [Return] to see
a screen similar to the following:
IP service (0 indicates ‘‘not configured’’)
Prompt to access IP configuration
Figure 4-4. Example of Accessing an Item That Is Not Currently Configured
C
o
n
f
iguration
Editor
4
Configuration
Editor
4
How To Use the Configuration Editor
How To Operate the Configuration Editor
4-11