User's Manual

How to exit from Quick Configuration and reboot the router:
Use this procedure if you want to save and implement any configuration
changes that you have made in the current Quick Configuration session.
1. Press the [Ctrl] [C] key combination and then type y to exit from the
Quick Configuration utility. You will then see the “save and exit”
prompt:
Note If the cursor is located in the rightmost (DECnet area.node) cell of the
last port listed in the Quick Configuration screen, you can exit and
display the ‘‘Save and Exit’’ prompt by just pressing [Return].
The
‘‘save
and exit’’
prompt
Figure 3-6.Example of ‘‘Save and Exit’’ Prompt
Quick
Configuration
3
How To Use Quick Configuration
How To Create a Configuration
3-9