User's Manual

To move horizontally or vertically from one field to another, use the [>],
[<], [^], and [v] keys.
To enter a value in a field, move the cursor to that field and type the
value, then press [Return]. The cursor then moves to the next field.
How To Exit From Quick Remote
To exit from Quick Remote, press the [Ctrl] [C] key combination. You will
then be prompted with:
Save configuration and exit Quick Remote (y/n)?
If you want to save the configuration and exit, type y. Quick Remote
then saves the currently displayed configurations and returns you to the
Main menu.
If you don’t want to save the configuration (or if you decide not to exit),
type n. You will then be prompted with
Make more changes (y/n)?
• To remain in Quick Remote, type y and press [Return].
• To exit from Quick Remote without saving any changes, type n
and press [Return]. Quick Remote then returns you to the Main
Menu.
The remaining sections of this chapter describe how to set up Quick
Remote to create a minimal configuration for IP and IPX routing
services and to enable or disable bridging on the first WAN and LAN port
of the remote router.
How To Use Quick Remote
Quick Remote Operation
8-8