User's Manual

1. In the above case:
a. If you don’t want to continue in Quick Configuration, type n and
press [Return] to return to the Main Menu.
Note If you type n and return to the Main menu, the configuration conflict
remains in the router and the above screen will re-appear the next time
you start Quick Configuration.
b. If you want to eliminate the conflict and continue with Quick
Configuration, type y and press [Return].
You will then see the following prompt:
Are you sure you want to delete all conflicting
configurations (y/n)?
2. Type y and press [Return] again to confirm conflict deletion and to start
Quick Configuration.
Indicates slot(s) in which a
configuration conflict exists
Figure 3-25. The "Configuration Conflict" Screen
Quick
Configuration
3
How To Use Quick Configuration
Operating Notes
3-37