Installation Manual

4. When you see the message ‘‘Waiting for speed sense’’, press [Return] to
display the Main menu (figure 1-24 on page 1-27).
(You may need to press [Return] more than once to get console access
again.)
Caution The Reset-Clear combination erases the current configuration and
replaces it with the default (factory) configuration. In this case, bridging
(without spanning tree) is enabled on all ports. However, routing is not
enabled unless a Smartboot configuration for this router has previously
been enabled on the network. (If Smartboot has been enabled, bridging
may or may not be enabled, depending upon the resulting configuration.)
Router Operation
Resetting the Router, Clearing the Passwords, and Clearing the Router
2-18