User's Manual

The NCL command prompt, near the bottom of the screen, always
appears (followed by a colon) as the current system name of your
router, followed by a colon. In the above figure, the NCL prompt appears
as DEFAULT_CONFIG:, which is the factory default. (You can use Quick
Configuration or the Configuration Editor to change the system name.)
How To Exit From NCL
At the NCL prompt, type
exit
and press [Return] to return to the Main menu.
NCL Prompt
Figure 7-2. Example of the NCL Screen
How To Use the Network Control Language (NCL) Commands To Manage a Router
How To Start NCL
7-4